Vertical Computer Tension Machine

是测定和调整金刚石圆锯张力的设备，直径范围为400mm~2000mm；把基体垂直装在设备之后，不用卸下，在同一条件、同一个轴直接调整和测定张力及端面跳动。
It is a machine for measuring and adjusting the tension of the diamond saw blade. The diameter range is 400mm~2000mm, the largest saw blade diameter is 3000mm. After the substrate is vertically installed on the device, it is not required to remove. The tension and face runout are directly adjusted and measured under the same conditions and on the same axis.

主要特征
Main features 
1.由安精密轴承的测定轴和精密法兰盘的工作台组成
  Consists of the precision axis of precision bearings and the precision flange table
2.具有可以调整单方向的气动活塞动作和调整压力性能的测定张力功能
  It has a tension function that can adjust the pneumatic piston movement and adjust the pressure performance in one direction.
3.用油压固定锁住基体
  Secure the substrate with oil pressure
4.调整液压轮倾斜角的功能
  Adjust the tilt angle of the hydraulic wheel
5.自动和手动基体旋转装置， 自动张力测定装置
  Automatic and manual base rotating device, automatic tension measuring device
6.非接触式线形传感器，把基体变形可以测定到0.01 mm
  Non-contact linear sensor, the deformation of the substrate can be measured to 0.01 mm
7.完全用电脑系统画出变形和应力曲线，可以打印输出
 Fully use computer system to draw deformation and stress curve, print out
8.张力和有关测定的所有技术资料可以储存而于管理
Tension and all technical data related to the determination can be stored and managed

技术资料
Technical Information

型号 Model	VTC 4/20	辊半径 Roll Radius	55mm
电源 Power supply	380V，60Hz（可按要求变更）(can be changed as required)	张力测定压力 Tension measurement pressure	5~30kg
电力消耗 Power Consumption	5KVA	基体旋转 Base Rotation	0~30转/分 0~30 R/min
张力可调整压力 Tension adjustable pressure	400kg~10000kg	设备尺寸 Equipment size	长L 3000mm 宽W 1400mm 高H 1750mm
张力角变更功能 Tension adjustable pressure	最大-3° Maximum -3°
辊子速度 Roller speed	15m /分（可以变更） 15m/min (can be changed)	重量 Weight	约2400kg

注Note：
 - 可按用户的要求进行特殊变更制造。最大可做到3000mm锯片。
- Special changes can be made according to the user's requirements. Maximum 3000mm saw blade.